Misc

Desc. = • Extract flange-type rear axles, semi-floating rear axles bearings, balancers and other press-on parts • With the 2/3 jaw combination, it can remove gears, outer races, grease retainers, oil seals and other internal/ external pulling jobs • Used on most cars and light trucks that have axles with bolts & studs no larger than 9/16" in diameter • Applies to 4.5 & 6 bolt stud circles that range from 4-1/4" - 5-9/16" • Length: 23" • Slide hammer is 5 lbs (2.32kg) • Comes in a convenient blow mould storage case

Desc. = • Sturdily built. Flexible drive shaft permits easy access to all cylinders • Cone expansion adjusts hone to cylinder wall with uniform pressure • Adjustable spring tension lets you select desired pressure • Fits standard 1/4 or 3/8" drill • Range: 1" - 3" cylinder diameter • No extensions required • Supplied with 180 grit 2" stones recommended for quick, positive seating of all piston rings • Replacement Parts: • Replacement Stone Set: H1864C Set of 3: 180 Grit, 2" Long • Optional Stone Set: H1844E Set of 3: 220 Grit, 2" Long

Desc. =

Desc. = • For standard and H.E.I. ignition. • Has tapered ground edge for gapping plugs. Adjusting hole with flange to adjust side wire without pressuring center electrode. • Has both metric and decimal markings. • Gaps all plugs from .020 - .100 (0.50 - 2.5mm)

Desc. = • For draining and filling differentials, transmissions etc

Desc. =